Supported Command Classes
The Yale Assure Z-Wave Plus ™ deadbolts follow the Z-Wave
Specifications for all command classes that are implemented. Please refer to these
specifications for specifics on how each command class works. The supported
command classes are listed below, and certain sections contain details about
operations that may be specific to the Yale lock. If a section is blank, then please
refer to the Z-Wave
As a secure device, most of the command classes supported by the lock are
required to be sent securely with Z-Wave
controller can use the Security Command Class to get this list directly from the
lock. If a command class requires security, it is also indicated as such below.
Specification used: Z-Wave
Command Class Z-Wave Plus ™ Info, Version 2
The Z-Wave Plus ™Info command class reports the following information:
•
Role Type: Slave Sleeping Listening (0x07)
•
Node Type: Z-Wave Plus ™ Node (0x00)
•
Installer Icon Type: 0x0300
•
User Icon Type: 0x0300
Command Class Manufacturer Specific, Version 2*
* This command class requires security.
The Manufacturer Specific command class reports the following information:
•
Manufacturer ID: 0x0129
o This is the manufacturer ID assigned to ASSA ABLOY.
•
Product ID:
o The Product ID can be used to differentiate between hardware
platforms, as well as between ZW2 and ZW3. See Table 1 - First 2
Digits of Product ID, below, for details.
o Product IDs for the locks covered in this document are as follows:
0x4600 for older version of Yale Residential Deadbolt Lock
▪
0x46D1 for YRD216-ZW3 (Keyed Push Button Deadbolt)
▪
0x46D2 for YRD226-ZW3 (Keyed Touch Screen Deadbolt)
▪
0x46D5 for YRD256-ZW3 (Keyless Touch Screen Deadbolt)
▪
0x46C1 for YRC216-ZW3 (Interconnected Push Button
▪
Deadbolt)
™
specifications.
™
Specifications Release Dec 2021 BCD
™
™
security. During enrollment, the
7
Command Class