Advertisement
EBARA Horizontal Split Case Pump
Operating, Installation, and Maintenance
4 4 . . I I n n s s t t a a l l l l a a t t i i o o n n
Warning
Attention
EBARA
PUMPS AMERICAS CORPORATION
www.pumpsebara.com
PM10U-
(t) 803.327.5005 (f) 803.327.5097
In order to prevent the risk of injury due to the overturning
of the pump and damage to the pipes due to the vibration of
the pump, please fix the pump firmly with the anchor bolts.
When moving this product, please work carefully in accordance
with the lifting essentials (nameplates). Beware of falling.
Do not touch the motor with water to avoid electric shock,
leakage, fire and failure.
For the operation and construction of the pump, please
confirm its weight and shape for safe operation to avoid the
risk of falling and personal accident.
When conducting the motor insulation resistance test during
assembly, remove the wiring from the control cabinet, measure
the insulation resistance with an insulation resistance meter
that matches the power supply voltage, and confirm that the
resistance between the motor wire and the ground wire exceeds
1MΩ before wiring. So as not to burn the motor, resulting in
electric shock and fire accidents.
Do not cover the motor with blankets, cloth, etc. to avoid
overheating and fire.
In order to prevent freezing in winter, measures such as heat
preservation, heating and drainage should be taken. In order
to prevent the water inside from freezing and causing damage
when the pump is stopped.
In order to prevent the mixing of cutting oil, rubber agent,
and foreign matter generated during manufacturing, a suitable
filter is installed at the outlet, and it is fully cleaned
and filtered, and it can be used after confirming that there
is no foreign matter.
- 6 -
CB Series
EBARA
CORPORATION
6
Advertisement
