Advertisement
EBARA Horizontal Split Case Pump
Operating, Installation, and Maintenance
(2)Before turning on the switch, check the following items.
(a)Whether the fuse is installed.
(b)If there is an error in the wiring.
(c)Whether the grounding is corrected
5 5 . . O O p p e e r r a a t t i i o o n n
Warning
Attention
EBARA
PUMPS AMERICAS CORPORATION
PM10U-
www.pumpsebara.com
(t) 803.327.5005 (f) 803.327.5097
After alignment, be sure to install the coupling guard. Also,
keep away from rotating parts while the pump is running. High
speed operation may cause personal injury.
When the pump is running, do not touch the rotating parts such
as the main shaft and coupling. In addition, even if the pump is
not running but the power is on, it may suddenly start running
due to automatic operation, so do not touch the rotating parts
such as the main shaft and the coupling at this time. High speed
operation may cause personal injury.
Do not place dangerous or flammable materials near the pump and
motor. Sparks or flames in the event of a malfunction can cause
a fire.
Do not run the pump for more than 2 minutes with the discharge
valve closed. The rise of pressure and temperature in the pump
will cause damage to the casing and plug, etc., causing the
motor to burn out.
Do not touch the electrically charged parts while the power is
on. There is a risk of electric shock.
Do not let the motor get wet to avoid electric shock, leakage,
fire and other accidents.
When the pump is stopped and then restarted, follow the
requirements of "Installation" and "Operation" and conduct a
trial operation. In order to prevent the pump from running
poorly, the motor burnt out, and dry running.
Do not run dry to prevent air from being mixed into the liquid.
In order to avoid damage to the casing, bearing and shaft seal,
the pump cannot work. Also, overheating of the pump can cause
damage.
If the liquid temperature exceeds 40℃, do not touch the pump to
avoid high temperature burns.
- 14 -
CB Series
EBARA
CORPORATION
14
Advertisement
