Advertisement
EBARA Horizontal Split Case Pump
Operating, Installation, and Maintenance
3 3 . . S S p p e e c c i i f f i i c c a a t t i i o o n n
Please confirm the nameplate according to the performance of the pump you purchased, such as
Head, Flow rate, and rotational speed. The table below gives the standard specifications. The
pressure unit used in this manual is the International Unit(SI), and its reference values is
in { }.
Warning
Please do not use inverter to drive, it may cause pump failure.
When using important equipment (computer cooling equipment, cold storage
cooling equipment, etc.), be sure to have a backup pump. To avoid water
cut-off due to water pump failure, equipment can not run
Attention
EBARA
PM10U-
PUMPS AMERICAS CORPORATION
www.pumpsebara.com
(t) 803.327.5005 (f) 803.327.5097
Do not place the pump outside or in a rainy place. The deterioration of
insulation is the cause of the electric shock fire.
If the working condition or power supply does not meet the specifications,
it cannot be used. Otherwise, it will cause damage to the water pump or
electric shock, leakage, fire and other accidents.
Be sure to implement ground operation. Failures and leakage of electricity
can cause electric shock if operated without grounding.
Considering the life of the machine, please choose a place that is well
ventilated, free from dust, corrosive or explosive gas, salt, moisture,
steam, frost, and not exposed to the sun and rain. Otherwise, in harsh
environments, the insulation of the motor and the control cabinet will be
lowered, which may cause electric shock and fire accidents.
Please place the pump in a room managed by someone, or in a location that
is not easily accessible by outsiders, separated by a fence. Touching the
rotating parts and high temperature parts may cause personal injury.
Please install an earth leakage circuit breaker dedicated to this product.
A wiring breaker with an earth leakage alarm output is recommended to
avoid electric shock or fire accident.
Be sure to prepare a spare pump when using it with living things (fish
farms, aquariums, etc.). In order to avoid the lack of oxygen caused by
the failure of the water pump.
Do not use in copper-weary biological environments. so as not to
significantly shorten the life span of the organism.
Set up a spare pump for use when the pump stops. To prevent the device from
stopping by water-breaking.
In order to prevent the mixing of cutting oil, rubber agent and foreign
material produced during manufacture, a suitable filter is set up at the
outlet, the filter is fully cleaned and the debris is confirmed to be free
of debris before it can be used.
Do not use liquids other than water, such as oil, seawater, organic
solvents and other media. Otherwise, there will be water pump failure,
electric leakage and electric shock.
In winter, in order to prevent ice, to do insulation, heating , drainage
measures. To prevent damage caused by ice in the interior when the water
pump is stopped.
Regularly confirm the operating status of the protection relay. To avoid
accidents that do not work properly, resulting in electric shock and
malfunction.
- 4 -
CB Series
EBARA
CORPORATION
4
Advertisement
