Nikon D70s Manual page 210

Indicator
Control
Monitor panel
THIS CARD
CANNOT BE
(blinks)
USED
FOLDER
CONTAINS
NO IMAGES
ALL IMAGES
HIDDEN
FILE DOES
NOT
CONTAIN
IMAGE DATA
A Note on Electronically-Controlled Cam er as
In extremely rare in stanc es, un usu al char ac ters may ap pear in the control panel and the
cam era may stop func tion ing. In most cas es, this phe nom e non is caused by a strong
ex ter nal stat ic charge. Turn the cam era off, re move and replace the battery, and turn
the cam era on again, or, if you are using an AC adapt er (available sep a rate ly), dis-
con nect and re con nect the adapt er and turn the cam era
on again. If the problem persists, press the reset switch
(see right) and then reset the camera clock to the correct
date and time (
func tion, con tact your re tail er or Nikon rep re sen ta tive.
Note that dis con nect ing the power source as de scribed
above may result in loss of any data not re cord ed to the
memory card at the time the prob lem occurred. Data
already recorded to the card will not be affected.
200
Problem
• Error accessing memory
card.
• Unable to create new
folder
• Card has not been for-
matted for use in D70S.
• Memory card contains no
images.
• Current folder is empty.
All photos in current folder
are hidden.
File has been created or
modifi ed using a com put er
or different make of cam-
era, or fi le is corrupt.
16). In the event of con tin ued mal-
Solution
• Use Nikon-approved card.
• Check that contacts are
clean. If card is dam aged,
contact retailer or Nikon
rep re sen ta tive.
• Delete fi les or insert new
memory card.
• Format memory card.
• Insert another card.
• Set Playback fl dr to All.
Set Playback fl dr to All or
use Hide im age to reveal
hidden photos.
Delete fi le or
memory card.
Reset switch
192
2,
20
20,
24
21
20
126
126,
129
reformat 21,
124