Nikon D70s Manual page 189

7
8
‡ If printer supports cropping, photo can be cropped
for printing by pressing
right will be displayed; rotate main command dial to
zoom in or out and use multi selector to scroll to other
areas of image (note that prints may become slightly
"grainy" when highly enlarged). When desired area is
framed in monitor, press
selection dialog. Only selected portion of photo will
be included when image is printed.
9
Repeat steps 7 and 8 to select additional pictures. To deselect picture,
press multi selector down when number of prints is 1. To exit to Pict-
Bridge menu without printing, press
10
Scroll through photos. Current photo
shown at bottom of display.
Press multi selector up to select photo
and set number of prints to 1. Selected
photos are marked by
multi selector up or down to specify
number of prints (up to 99).
button. Dialog shown at
button to return to print
Begin printing. To cancel and return
to PictBridge menu before all images
have been printed, press
again. Turn camera off and disconnect
USB cable when printing is complete.
button.
icon. Press
‡
button
179