Mirror Lock-Up; Video Mode - Nikon D70s Manual

Hide thumbs Also See for D70s:
Table of Contents

Advertisement

Mirror Lock-Up

This option is used to lock the mirror in the up
position to allow inspection or cleaning of the
low-pass fi lter that protects the CCD image sen-
sor. See "Technical Notes: Caring for the Cam-
era" (
194). Highlight Mirror lock-up in the
setup menu (
155) and press the multi selector
to the right. Press the multi selector up or down
to highlight an option, then press to the right to
make a selection.
Option
When shutter is released, mirror is locked in up position and blinking
"– – – – – – " is displayed in control panel. Mirror will return to down
position when camera is turned off. To ensure power is available to lower
Yes
mirror, Nikon recommends using this option only when camera is powered
by EH-5 AC adapter.
No
Mirror functions normally.

Video Mode

Before connecting the camera to a video device
such as a television or VCR (
video mode setting that matches the video stan-
dard used in the device. Highlight Video mode
in the setup menu (
selector to the right. Press the multi selector up
or down to highlight an option, then press to the
right to make a selection.
Option
NTSC Use when connecting camera to NTSC devices.
Use when connecting camera to PAL devices. Note that number of pixels in
PAL
output is selectively reduced, causing drop in resolution.
Video Output
The default video standard varies with the country or region of purchase.
162
Description
170), choose a
155) and press the multi
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents