Nikon D70s Manual page 102

White Balance Bracketing
1
Choose WB bracketing for Cus tom Set ting
12 (BKT set;
ance bracketing will not be performed if NEF
(Raw) or NEF+JPEG Basic is selected for im-
age quality.
2
Press ing the
mand dial until
panel. The
and the arrows (
electronic analog exposure display will start to
blink.
3
Press the
mand dial to choose a bracketing program (
93). Each increment is equivalent to about 10
mired ( 51); if the number of images in the
bracketing program exceeds the number of
exposures remaining, the bracketing progress
indicator (
blink.
Shooting Mode
In all modes (including continuous mode), the shutter is released only once each time
the shutter-release button is pressed. Each shot is processed to create the number of
copies specifi ed in the bracketing program.
Turning the Camera Off
If the power is turned off during recording, the camera will not power down until all
shots in the bracketing sequence have been recorded.
92
146). Note that white bal-
button, rotate the main com-
is displayed in the control
icon in the control panel
and ) at the ends of the
button and rotate the sub-com-
, , or ) will