Instruction book
4.5
Storage after installation
Procedure
Protect the machine against dust and moisture, if possible in a clean, cool, dry and well ventilated area.
Make sure that the machine is not subject to vibration.
If the machine is stored in packing, put some vapor corrosion inhibitor (VCI) paper into the packing.
Store the machine in its normal position, not upside down or on its side.
If the machine is stored for 1 year or more, rotate the bearings once a month to change the position of the
roller balls in the bearings. Consult Atlas Copco Service.
2920 7089 80
If the compressor is going to be stored without running from time to time,
protective measures must be taken.
55