Siemens SITRANS TS100 Compact Operating Instructions page 22

Installing/mounting
3.2 Mounting the SITRANS TS500
7. With small conduit diameters, mount the sensors against the flow direction. Angled
a pipe elbow
Figure 3-2
8. Follow the torques required between device extension and conduit Torques between device
extension and conduit (Page 50).
– If customized adaptations are necessary (only M24 connectors), note the required
– When mounting a SITRANS TS500 in full material design type 4 without flange (only
22
③
.
①
At a right angle to the flow
②
In the pipe elbow against the flow direction
③
Angled against the flow direction
Possible mounting positions of the sensor
torques between the device head and extension as specified in Torques between device
head and extension (Page 50).
Europe portfolio 7MC752..) of the device extension at the conduit, follow the
required torques between device extension and conduit (Page 50).
SITRANS TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Compact Operating Instructions, 06/2023, A5E03920348-AH
②
or in