10. If cross-controller RAID is required, select Enable RAID spanned over VMD
Controller.
Figure 6-10. Created Volume without
enabling RAID spanned over VMD
controller
11. Select specific disks for RAID with an [X].
•
RAID0: Select at least two disks
•
RAID1: Select only two disks
•
RAID5: Select at least three disks
•
RAID10: Select only four disks
12. Select Stripe Size (Default 64KB).
13. Select Create Volume.
14. If another RAID is needed, start again at step 9.
15. Press [F4] to save and reboot.
Chapter 6: Optional Components
Figure 6-11. Created Volume with
enabling RAID spanned over VMD
controller
91