Supermicro SuperServer SYS-221HE-FTNR User Manual page 90

6. Press [F4] to save the configuration and reboot the system and press [DEL] to enter
BIOS.
Note: Disabling the VMD controller without first deleting the associated existing RAID
volume can lead to unexpected behavior. This action is strongly not recommended.
Note: The effects of physically changing or swapping a CPU on the VMD controller
enablement have not yet been thoroughly tested or documented.
7. Switch to Advanced > Intel(R) Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
8. Set Name.
9. Set RAID Level.
Figure 6-9. BIOS, Enabling CPU2 Example
90
Chapter 6: Optional Components