9150-0125-01 R-4
Read Transmitter Notify Flags via NUS, UART.
7.2.3
AT+TXNSF?
Set Transmitter Notify Flags via Configuration Service
7.2.4
AT+TAXNSF =<
7.2.5
Read Transmitter Notify Flags via Configuration Service
AT+TAXNSF?
Example:
To receive Transmitter Activation and Temperature detected event notification, the valid command to activate
•
notification AT+TXNSF = 34.
To receive all Transmitter event notifications, the valid command to activate all notifications AT+TXNSF = 2047.
•
AT+TXNSF = 2048 will return ERROR.
•
7.3
MESSAGE QUEUE EVENT NOTIFICATION SETTINGS
Supported Transmitter Event notifications code <messageQueueNotifyFlags>
•
MESSAGE_QUEUE_NOTIFY_FLAGS_MESSAGE_QUEUED
MESSAGE_QUEUE_NOTIFY_FLAGS_MESSAGE_TRANSMITTED =
•
MESSAGE_QUEUE_NOTIFY_FLAGS_MESSAGE_DEQUEUED
•
•
MESSAGE_QUEUE_NOTIFY_FLAGS_RAS_EXCEPTION
•
MESSAGE_QUEUE_NOTIFY_FLAGS_TEMP_EXCEPTION
•
MESSAGE_QUEUE_NOTIFY_FLAGS_UNDERTEMP_EXCEPTION =
•
MESSAGE_QUEUE_NOTIFY_FLAGS_POWER_EXCEPTION
Set Message Queue Notify Flags via NUS, UART
7.3.1
AT+QNSF = <messageQueueNotifyFlags>
7.3.2
Read Message Queue Notify Flags via NUS, UART
AT+QNSF?
Response
+ QNSF: <messageQueueNotifyFlags>
7.3.3
Set Message Queue Notify Flags via Configuration Service
AT+QANSF = <messageQueueNotifyFlags>
Read Message Queue Notify Flags via Configuration Service
7.3.4
AT+QANSF?
Response
+ QNSF: <messageQueueNotifyFlags>
Example:
•
To receive Message transmitted and Message dequeued event notification, the valid command to activate
notification AT+QNSF = 6.
•
To receive all Message Queue event notifications, the valid command to activate all notifications AT+QNSF = 127.
•
To receive all Transmitter event notifications over configuration service, the valid command to activate all
notifications AT+QANSF = 127.
AT+QNSF = 128 will return ERROR.
•
ST150M User Manual
transmitterNotifyFlags
Confidential & Proprietary Information
>
=
1
2
=
4
=
8
=
16
32
=
64
41