Set Power Management Notify Flags Via Nus, Uart; Read Power Management Notify Flags Via Nus, Uart; Set Power Management Notify Flags Via Configuration Service; Read Power Management Notify Flags Via Configuration Service - Globalstar ST150 User Manual

9150-0125-01 R-4

Set Power Management Notify Flags via NUS, UART.

7.10.1
AT+PNSF = < PowerManagementNotifyFlags>

7.10.2 Read Power Management Notify Flags via NUS, UART.

AT+PNSF?
Response
+ PNSF: < PowerManagementNotifyFlags >

7.10.3 Set Power Management Notify Flags via Configuration Service

AT+PANSF = < PowerManagementNotifyFlags >

7.10.4 Read Power Management Notify Flags via Configuration Service

AT+PANSF?
Response
+ PNSF: < PowerManagementNotifyFlags >
Example:
• To receive ASIC RESET and POWER STATE CHANGE event notification, the valid command to activate
notification AT+PNSF = 6.
• To receive all Power Management event notifications, the valid command to activate all notifications
AT+PNSF = 127.
To receive all Power Management notifications over configuration service, the valid command to activate
•
all notifications AT+PANSF = 127.
AT+PNSF = 128 will return ERROR.
•

7.11 EXTERNAL FLASH LOGGING EVENT NOTIFICATION SETTINGS

Supported External Flash Logging Event notifications code <ExternalFlashLoggingNotifyFlags>
• MESSAGE_QUEUE_NOTIFY_FLAGS_MESSAGE_QUEUED LOGGING_NOTIFY_QSPI_ERROR = 1
• LOGGING_NOTIFY_INTERNAL_FLASH_ERROR
• LOGGING_NOTIFY_GPS_POSITION_TRACK

Set External Flash Logging Notify Flags via NUS, UART.

7.11.1
AT+LNSF = < ExternalFlashLoggingNotifyFlags >

Read External Flash Logging Notify Flags via NUS, UART.

7.11.2
AT+LNSF?
Response
+ LNSF: < ExternalFlashLoggingNotifyFlags >
7.11.3

Set External Flash Logging Notify Flags via Configuration Service

AT+LANSF = < ExternalFlashLoggingNotifyFlags >
ST150M User Manual Confidential & Proprietary Information
= 2
= 4
47