Quick Start/Configuration Guidelines - Globalstar ST150 User Manual

9150-0125-01 R-4
2.2

QUICK START/CONFIGURATION GUIDELINES

To get up and running, the following details both mandatory and optional steps:
1. Globalstar offers an ST150M Dev Kit that provides a quick way to power-up the module and
communicate with modem AT command interface via physical UART, Globalstar Mobile App, or BLE
Nordic UART Service (NUS)
2. Create an Account
a. Create a VAR account and access the Globalstar IoT Data Management Portal (Requires
VAR/VAM BackOffice endpoint to route device traffic to)
b. Or, work with a Globalstar VAR to setup billing, activate your module, and create a user login
account (Requires backoffice endpoint to route device traffic to)
c. Or, use Davra's IoT platform to setup billing, activate your module, and direct device traffic to
your Davra account (Does not require separate backoffice endpoint)
3. Optionally, if using 2A or 2B, integrate backoffice APIs with the Globalstar Simplex API for
programmatic API access to billing and device management APIs
4. Optionally, if using 2A or 2B, access Globalstar's Data Warehouse Portal for real-time debugging of
device traffic
5. Get the Globalstar Mobile App and use your account credentials from step 2 to login, configure your
device, and sync device activation status
6. Optionally, send a raw or truncated message via modem AT commands to initiate device OTA traffic
ST150M User Manual Confidential & Proprietary Information
13