Brush Roll - Shark EZ ROBOT SELF-EMPTY 9000 Series Owner's Manual

If some debris remains wrapped around the brushroll, continue cleaning to allow the brushroll to clean itself.
To manually clean the brushroll, follow the below steps:
To access the brushroll, push up on the tabs on the
brushroll access door, then lift off the door.
NOTE: When cutting away debris, be sure not to cut the brushroll.
NOTE: Replace brushroll every 6 to 12 months, or when visibly worn. See sharkaccessories.com for replacement parts.
MAINTENANCE
BRUSHROLL
Lift out the brushroll, and clean off any debris.
Reinstall the brushroll, inserting the flat end first.
Close the brushroll access door and press down until
both sides click into place.
s h a r kc l e a n . c o m