Shark EZ ROBOT SELF-EMPTY 9000 Series Owner's Manual page 23

Why isn't my robot charging?
• Verify that the base is connected to power and the power switch on the back of the base is in
the (I) ON position. When the base is plugged in and the power switch is turned on, the GREEN
power indicator light
different electrical outlet.
• If the BLUE charging indicator light on the base is not on, verify that the power switch on the
side of the robot is set to the (I) ON position. If the robot still is not charging, verify that the
power switch on the back of the base is set to the (I) ON position.
• The robot must be aligned correctly on the base, with its back side against the debris intake on
the base. The two metal pads on the bottom of the robot must be touching the metal charging
contacts on the base.
When charging begins, the robot will beep. The BLUE charging indicator light on the base will
PULSE, and the battery light on the robot will flash blue.
When charging is complete, the battery light on the robot and the blue charging indicator light
on the base will both illuminate steadily.
NOTE: Charge the battery completely before first use. A full charge may take up to 6 hours. When charging
is complete, the battery indicator light on the robot and the blue charging indicator light on the base will
illuminate steadily. For more help, contact robot support at 1-888-228-5531.
on the base will illuminate. If the green light is not on, try connecting to a
FAQ
s h a r kc l e a n . c o m