CLEAN SENSORS AND CHARGING PADS AS NEEDED. With a dry cloth, gently dust off the sensors and
pads located on the bottom of the robot and on the base.
IMPORTANT: The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when
they are dirty. For best results, clean sensors regularly.
CLEAN SIDE BRUSH AS NEEDED.
NOTE: Remove and replace any side brush that is bent or damaged. To remove a brush, lift it off its peg.
s h a r kc l e a n . c o m
MAINTENANCE
CLEANING SENSORS AND CHARGING PADS
CLEANING SIDE BRUSH
Carefully unwind and remove any string or hair
wrapped around brush.
Gently wipe brush with a dry cloth. To reinstall, snap
the brush over the peg. Spin the brush manually to
make sure it is installed correctly.