Shark EZ ROBOT SELF-EMPTY 9000 Series Owner's Manual page 15

MAINTENANCE
CLEANING AND REPLACING THE ROBOT FILTER
For best results, regularly clean and replace the filter in the robot. See sharkaccessories.com
for replacement filters.
IMPORTANT: DO NOT use water to clean the robot filter.
Pull filter out of the dust bin by the tabs. Lightly tap the filter to remove dust and debris.
Reinsert the filter into the robot dust bin, then
slide the dust bin back into the robot.
NOTE: Make sure to insert the dust bin completely, until it clicks into place.
s h a r kc l e a n . c o m