Table of Contents
Advertisement
Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it
cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the
BotBoundary™ strips. To purchase BotBoundary strips, please visit sharkaccessories.com. For best results,
prepare your home as indicated below, and schedule a daily cleaning to ensure all floor areas are regularly
maintained.
NOTE: Scheduling is one of many features that are only available in the app.
OBSTRUCTIONS
Clear cords and small objects
from floors and open interior
doors to ensure a complete
cleaning of your home.
THRESHOLDS
Your robot may have some
trouble clearing thresholds
higher than an inch. Block
off high thresholds with the
BotBoundary strips.
To purchase BotBoundary
strips, please visit
sharkaccessories.com
STAIRS
Your robot's cliff sensors will
prevent it from falling off
ledges. For the cliff sensors
8-inch
Min.
to work properly, all runners,
rugs, or carpets must be at
least 8 inches from any stairs
(or extend over the edge of
the stairs.)
s h a r kc l e a n . c o m
PREP YOUR HOME
AVOID MOVING THE
ROBOT OR BASE
While your robot is cleaning,
do not pick it up and move it,
or move the charging base—
this will impact the robot's
ability to clean your home.
CHECK BASE FILL LEVEL
During the first few weeks,
your robot will empty more
debris than usual. Check the
fill level regularly. The dust
bin is designed to hold up
to 30 days' worth of debris,
but home environments
vary, and the bin may fill up
quicker in some homes.
LIGHTING CONDITIONS
For best results, run your
robot in well-lit conditions. If
you run your robot at night,
keep the lights on in the areas
to be cleaned.
Advertisement
Table of Contents
