■
Error code 9306
No Paper
Load #S paper in #T.
For printing specifying Auto, it was detected that no paper was loaded in any of the paper trays.
< User Check >
- Load paper to any tray.
Step
1
MP paper empty actuator caught
on some position
2
T1 paper feed actuator caught on
some position
3
T2 paper feed actuator caught on
some position
4
Connection failure of the MP
paper empty/registration front
sensor PCB harness
5
Connection failure of the T1
paper feed sensor PCB harness
6
Connection failure of the T2
paper feed sensor PCB harness
7
MP paper empty sensor failure
8
T1 paper feed sensor failure
9
T2 connector failure
10
Main PCB failure
Cause
2-74
Remedy
Re-assemble the MP paper empty
actuator.
Re-assemble the T1 paper feed actuator.
Re-assemble the T2 paper feed actuator.
Reconnect the MP paper empty/
registration front sensor PCB harness.
Reconnect the T1 paper feed sensor PCB
harness.
Reconnect the T2 paper feed sensor PCB
harness.
Replace the MP paper empty/registration
front sensor PCB ASSY.
Replace the T1 paper feed sensor PCB
ASSY.
Replace the T2 paper tray unit.
Replace the main PCB ASSY.
Confidential