Table of Contents
Advertisement
Error Message
1st line
No Tray
Reinstall tray 1
The paper tray
cannot be
detected, re-install
#T.
No Waste
Install the Waste
Toner
Toner Box.
Not
-
Available
Out of
Press Cancel
Memory
Turn the power off,
and then on again.
Print Data
Print Data is full.
Full
Press Cancel and
delete the
previously stored
data.
Prinit Unable
**
Registration
Registration failed.
Insufficient Toner
for Registration.
Registration failed.
Press Go, and try
again.
Registration failed.
Turn the power off
and then back on
again.
2nd line
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(after the registration of printing in
the engine)
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(before the registration of
printing in the engine)
While the T2 paper tray unit is
open state, print or adjustment
operation was attempted.
The waste toner sensor detected
that no waste toner box was set.
The function is not available for
any IDs.
The memory is insufficient to
expand the data of PC-Print.
The program update process
cannot be performed because
the memory is insufficient.
The memory used to store
secure print data exceeded the
memory size for secure print
data.
Error related to print
Refer to the error code of "**".
Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration performed
from the control panel.
Error occurred during patch data
printing in auto color registration
performed from the control panel.
Error occurred with the value
measured during auto color
registration performed from the
control panel.
2-26
Error
State
Codes
8505
8501
8402
6300
C700
C800
9A02
9A03
9A01
Refer
to:
2-68
2-68
2-67
2-58
---
4.10.3
2-81
---
4.10.2
2-81
**
2-78
2-79
2-78
Confidential
Advertisement
Table of Contents
Troubleshooting
