Brother HL-L9300CDW Service Manual page 74

■
Error code 5001
Replace PF Kit MP
-
Number of used pages for the PF kit MP has reached the upper limit. (Printing is not stopped.)
Step
1 The PF kit MP is at the end of life
2 Main PCB failure if the error code
remains after resetting the
counter of the PF kit MP
■
Error code 5002
Replace PF Kit1
-
Number of used pages for the PF kit 1 has reached the upper limit. (Printing is not stopped.)
Step
1 The PF kit 1 is at the end of life
2 Main PCB failure if the error code
remains after resetting the
counter of the PF kit 1
■
Error code 5003
Replace PF Kit2
-
Number of used pages for the PF kit 2 has reached the upper limit. (Printing is not stopped.)
Step
1
The PF kit 2 is at the end of life
2
Main PCB failure if the error code
remains after resetting the
counter of the PF kit 2
Cause
Cause
Cause
2-54
Remedy
Replace the PF kit MP. After replacing the
PF kit MP, refer to "1.3.29 Reset counters
for parts (Function code 88)" in Chapter
and reset the PF kit MP counter.
Replace the main PCB ASSY.
Remedy
Replace the PF kit 1. After replacing the
PF kit 1, refer to "1.3.29 Reset counters
for parts (Function code 88)" in Chapter
and reset the PF kit 1 counter.
Replace the main PCB ASSY.
Remedy
Replace the PF kit 2. After replacing the
PF kit 2, refer to "1.3.29 Reset counters
for parts (Function code 88)" in Chapter
and reset the PF kit 2 counter.
Replace the main PCB ASSY.
5,
5,
5,
Confidential