Brother HL-L9300CDW Service Manual page 207

Note:
- After disconnecting flat cables, check that each cable is not damaged at its end or
short-circuited.
- When connecting flat cables, do not insert them at an angle. After insertion, check
that the cables are not at an angle.
<How to fold the Laser unit flat cable>
<To be connected to Laser unit>
Supporting tape
(2 mm)
Fold down
Fold back
(2 mm)
Supporting tape
(Reverse side)
<To be connected to Main PCB>
8 mm
(Reverse side)
45°
45°
8 mm
Fig. 3-76
3-66
Contact plane
0
43±1 mm
(28 mm)
71±1 mm
(48 mm)
119±1 mm
(16 mm)
135±1 mm
(28 mm)
163±1 mm
(20 mm)
183±1 mm
(17 mm)
200 mm
Contact plane
Confidential