Step 5: Attach Cables; Network Printing - IBM S510-2222-00 Setup Manual

Step 5: Attach cables

Network printing

Your printer can be attached to a network or locally (directly to a
computer).
You can attach your printer to a network using standard network
cables.
A 10BaseT/100BaseTX Fast Ethernet port is standard on the
network, internet network, and duplex network printers. You can add a
Token-Ring or 10Base2 Ethernet port to any printer model by
installing an optional internal print server.
To attach the printer to a network:
1
Make sure the printer is turned off and unplugged.
2
Connect the printer to a LAN drop or hub using standard
cabling that is compatible with your network:
— Token-Ring, Ethernet 10BaseT, or Ethernet 100BaseTX
networks (Category 5) use an RJ-45 connector
35
Attach cables