Removing & Installing Body Components
Battery
Clip
Battery box
band
Positive terminal
Terminal nuts
Negative
terminal
Battery
Bolts
#
Removal
Make sure the ignition switch is in the
(Off) position.
Remove the tool box.
1.
Disconnect the negative - terminal from
2.
the battery.
Disconnect the positive + terminal from
3.
the battery.
Remove the clip.
4.
2
Open the battery box band.
5.
Remove the battery from the battery case
6.
taking care not to drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first.
Make sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
P. 117
2
P. 111
P. 44
2
Continued
109