Devolo dLAN 550 WiFi Manual page 21

20 Initial use
regular intervals of 0.5 sec., the adapter is ready
to operate but not yet integrated into the
dLAN network.
Integrating the dLAN 550 WiFi into an existing
dLAN network
Before you can use the dLAN 550 WiFi in your
dLAN network, first you have to connect it to your
existing dLAN devices as a network. This is accom-
plished by using a shared dLAN password. The
dLAN password can be set in different ways:
dLAN network encryption:
b
dLAN network encryption: at the touch of a
button: First press the PLC button on a device
in your existing network for approx. 1 second
and within 2 minutes, press the PLC button of
the new dLAN 550 WiFi for approx. 1 second.
or
b
dLAN network encryption by entering the
dLAN password in the dLAN network: More
information can be found in Chapter
Powerline.
As soon as the white LED lights up steady,
the new dLAN 1200+ WiFi ac is integrated
into your existing, encrypted dLAN net-
work.
devolo dLAN 550 WiFi
Integrating the dLAN 550 WiFi into an existing
WiFi network
To ensure that the dLAN 550 WiFi has the same
WiFi configuration as your WiFi router, you can ap-
ply the WiFi access data at the touch of a button
using the WiFi Clone function. This can be enabled
in different ways:
Enabling WiFi Clone:
b
Enabling WiFi Clone at the touch of a button:
First press the PLC button with the home icon
on the front side of dLAN 550 WiFi and then
press the WPS button of the WiFi router with
the access data you want to apply.
or
b
Enabling WiFi Clone via the configuration
interface. More information about this func-
tion can be found in Chapter WiFi Clone.
4.5