Table of Contents
Advertisement
9. Energy Efficient Use of Ceiling Fans
Ceiling Fan performance and energy savings rely
heavily on the proper installation and use of the
Ceiling Fan. Here are a few tips to ensure quality and
product performance.
Choosing the Appropriate Mounting Location.
Ceiling Fans should be installed, or mounted, in the
middle of the room and at least 7 feet above the floor
and 18 inches from the walls. If ceiling height allows,
install the Fan 8 - 9 feet above the floor for optimal
airflow. Consult your Luminance Brands Retailer for
optional mounting Accessories.
INSTRUCTION TO THE USER (if device contains a digital device)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception.
The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer
could void the user's authority to operate this equipment.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
Using the Ceiling Fan Year Round. In the summer,
use the Ceiling Fan in the counter-clockwise direction.
The airflow produced by the ceiling fan creates
a wind-chill effect, making you "feel" cooler. Select
a fan speed that provides a comfortable breeze,
lower speeds consume less energy. In the winter,
r e v e r s e t h e m o t o r a n d o p e r a t e t h e C e i l i n g
Fan at low speed in the clockwise direction.
This produces a gentle updraft, which forces warm
air near the ceiling down into the occupied space.
Remember to adjust your thermostat when using your
Ceiling Fan - additional energy and dollar savings could
be realized with this simple step!
Turn Off When Not in the Room. Ceiling Fans cool
people, not rooms. If the room is unoccupied, turn OFF
the Ceiling Fan to save energy.
10. Maintenance
Do not use water when cleaning your ceiling fan.
It could damage the motor or the blades and create the
possibility of an electrical shock.
26
WARNING
!
Advertisement
Table of Contents
