Usb Mode; Displaying Information - Grundig SC 990 iP Manual

USB­MODE
Playing­the­contents­of­an­
USB­data­medium
1
Switch off the device from stand-by mode
by pressing » 8 « on the remote control or
»ON/OFF« on the device.
2 Connect the USB interface of the MP3 player
or the card reader to the »USB« socket on the
device (on the right side), using a standard
USB cable;
or
insert the USB plug of the USB memory stick
in the »USB« socket (on the right side) on the
device.
3
Switch on the device from stand-by mode
by pressing » 8 « on the remote control or
»ON/OFF« on the device.
4
Press »M« repeatedly until »USB« appears on
the display.
– Display: »READ« and then the content of the
USB (Album and Files).
5 Select the album by pressing
ALBUM­+« on the device or » « or » « on
the remote control.
6 Select the file or track by pressing »
» «.
7
Press » « to start playback.
– Display: Playback starts, file information ap-
pears on the display.
8 Press » /BACK« on the device or »
7
on the remote control to stop playback.
Resume­function
When the USB operation is resumed after switch-
ing the device off and then on, or if the program
source has been changed, playback continues
from the start of the last selected title.
This function is not possible if another MP3
player or USB memory stick is connected.
To initialise the new medium and to play the first
title press » /BACK« twice on the device or
7
» / « on the remote control.
7
­ - ---------------------------------------------------------------------------------------------------------------------------------
»–­ PRESET/­
« or
/
7
Displaying­information
1
During playback, press »DISPL« on the re-
mote control.
– Display: The album and file numbers, the
ID3 Tag, the title, the artist, the album is
shown.
Pausing­and­continue­
playback­
1 Press » « during playback to pause.
– Display: »II«.
2
Continue playback by pressing » «.
Repeating­the­current­track
1
During playback, press »
– Display: The current album and file numbers
appear, the track is played again from the
start.
Selecting­another­file­or­track
During playback
1 During playback, press »
edly until the desired track or file is reached.
– Playback of the selected file or track starts
automatically.
In stop mode
1
In stop mode, press »
desired track or file is reached.
«
2
Start playback of the file or track by pressing
» «.
Searching­for­a­passage­
within­a­file­or­track
1
During playback, press and hold »
» «.
2 Release » « or »
been found.
– Playback continues.
« or » «.
« or » « repeat-
« or » « until the
« or
« when the passage has
13­
ENGLISH