Operation And Indication Section For Remote Control - Mitsubishi Heavy Industries SRK19CSS-S3 User's Manual & Installation Manual

Operation and indication section for remote control

Operation section
FAN SPEED button
Each time the button is pushed, the
indicator is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
Page 15
TEMPERATURE button
This button sets the room temperature.
(This button changes the present time and
TIMER time.)
ON TIMER button
This button selects ON TIMER operation.
Page 13
SLEEP button
This button changes to SLEEP operation.
Page 12
CLEAN switch
This switch changes the CLEAN mode.
Page 16
Indication section
CLEAN indicator
Indicates during CLEAN operation.
SLEEP indicator
Indicates during SLEEP operation.
TEMPERATURE indicator
Indicates set temperature.
(Does not indicate temperature when operation
mode is on AUTO)
FAN SPEED indicator
Indicates set air flow rate with
HI POWER/ECONO MODE indicator
Indicates during HIGH POWER/ECONOMY
mode operation.
Transmission procedure
When each button on the remote control is pressed with the remote control pointing towards the air-conditioner unit a signal is transmitted.
When the air-conditioner receives the signal correctly, it will beep.
RMA012A105G_J-L_RevC_EN.indb 8 RMA012A105G_J-L_RevC_EN.indb 8
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
lamp.
– 8 –
OPERATION MODE select button
Each time the button pushed, the
indicator is switched over in turn.
ON/OFF (luminous) button
Press for starting operation, press again
for stopping.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down) mode.
Page 11
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/right) mode.
Page 11
3D AUTO button
This button sets 3D AUTO operation.
Page 11
OFF TIMER button
This button selects OFF TIMER operation.
Page 12
RESET switch
Switch for resetting microcomputer and
setting time.
Page 14, 18
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
ON/OFF TIMER indicator
Indicates during ON/OFF TIMER operation.
OPERATION MODE indicator
Indicates selected operation with lamp.
(Auto) • (Cool) • (Fan) • (Dry)]
[
TIME indicator
Indicates present time or timer setting time.
AIR FLOW indicator
Shows selected flap and louver mode.
3D AUTO indicator
Indicates during 3D AUTO operation.
12/6/2018 11:48:20 AM 12/6/2018 11:48:20 AM