Operation And Indication Section For Remote Control - Mitsubishi Heavy Industries SRK25QA-S Technical Manual

Operation and indication section for remote control

Operation section
FAN SPEED button
Each time the button is pushed ■indicator is
switched over in turn.
HI POWER/ECONOMY button
This button changes the HI PO-
WER /ECONOMY mode.
TEMPERATURE
This button sets the room tem-
perature.(press the button to select the
current time and timing time)
ON TIMER button
This button sets the ON timer Times.
SLEEP button
This button changes the
"SLEEP" mode.
CLEAN button
This button changes the "CLEAN" mode.
Indication section
CLEAN indicator
ON/OFF (luminous) button
SLEEP indicator
Indicates during SLEEP mode
TEMPERATURE indicator
operation.
Indicates set temperature.
(Does not indicate temperature
when operation mode is on AUTO)
FAN SPEED indicator
Indicates set air flow rate with■ lamp.
lamp. HI POWER/ECONOMY indicator
Display in the HI POWER/ ECONOMY operation mode respectively.
button
The above illustration shows all
controls,but in practice only the
relevant parts are shown.
OPERATION MODE select button
Each time the button is pushed ■
indicator is switched over in turn.
ON/OFF button
Press for starting operation pr-
ess again for stopping.
AIR FLOW button
This
button
way of the air flap.
OFF TIMER button
This button sets the OFF timer
Times.
RESET switch
Switch for resetting microcomputer.
CANCEL button
button
The
ONtimer/OFF timer and SLEEP operation.
ON /OFF TIMER indicator
Indicates during ON/OFF TIMER mode operation.
mode operation.
Operation mode indicator
Indicates selected operation with lamp.
■ is used to indicate the mode selected: [
(COOLING) (HEATING)
Time display lamp
Display the current time or the time
set by timer.
Air supply display lamp
Display the swaying way of the wind guide blade.
-11-
sets the swaying
is used to cancel the timing
(AUTO)
(DRYING)]