High Power/Economy Operation Procedure - Mitsubishi Heavy Industries SRK19CSS-S3 User's Manual & Installation Manual

HIGH POWER/ECONOMY operation procedure

Concerning HIGH POWER operation
Pressing the HI POWER/ECONO button intensifi es the operating power and initiates powerful cooling operation for 15 minutes continuously.
The remote control
NOTE
•
During the HIGH POWER operation, the room temperature is
not controlled. When it causes an excessive cooling, press the HI
POWER/ECONO button once more to cancel the HIGH POWER
operation.
•
HIGH POWER operation is not available during the DRY, the
program timer operations and 3D AUTO operation.
•
During ON timer operation, HIGH POWER operation will start
when the ON time is reached.
Concerning ECONOMY operation
Pressing the HI POWER/ECONO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling. The unit
operates 1.5°C higher than the setting temperature for weak wind capacity during cooling. The remote control
indication is eraseed.
NOTE
•
It will go into ECONOMY operation the next time the air-condi-
tioner runs in the following instances.
1 When the air-conditioner is stopped using the ON/OFF
button.
2 When the air-conditioner is stopped in SLEEP or OFF
TIMER operation.
3 When CLEAN operation ends.
RMA012A105G_J-L_RevC_EN.indb 15 RMA012A105G_J-L_RevC_EN.indb 15
1
2
indicates but the FAN SPEED indication is erased.
If the air-conditioner is not operating, aim the remote control at the air-conditioner.
Press the ON/OFF button.
Press the HI POWER/ECONO button.
• When the operating mode is AUTO or COOL
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
(HIGH POWER) (ECONOMY)
• When the operating mode is DRY or PROGRAM TIMER
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
(ECONOMY)
•
When the following operations are conducted HIGH POWER opera-
tion will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER operation
has started.
4 When the 3D AUTO button is pressed.
•
When the following operations are conducted ECONOMY operation
will be canceled.
1 When the HI POWER/ECONO button is pressed again.
– 15 –
(Normal operation)
(Normal operation)
indicates but the FAN SPEED
12/6/2018 11:48:22 AM 12/6/2018 11:48:22 AM