Installation location setting
Take the air conditioning unit's location into account and adjust the left/right airflow range to maximize air-conditioning.
Air conditioner installation location and airflow range
The diagram below indicates the airflow ranges corresponding to the air-conditioner's installation location. Consider your room's layout and
set the airflow range to maximize conditioning effectiveness.
(Left End Installation)
General Information
•
mark will be displayed on the display panel while the air conditioner is in operation, regardless of the installation location of the unit.
• When installation location of the air conditioner had been set once, installation location will be memorized into the unit even if
unplugging the power cord. Please set it with a remote control again in case of changing the installation location of the unit.
• The installation location setting can not be performed while the unit is in operation.
RMA012A105G_J-L_RevC_EN.indb 17
RMA012A105G_J-L_RevC_EN.indb 17
1
2
3
4
Airflow range
(Center Installation)
If the air conditioning unit is running, press the ON/OFF
button to stop.
The installation location setting cannot be made while the unit is running.
Press the AIR FLOW
(UP/DOWN) button and the
AIRFLOW
(LEFT/RIGHT) button together for 5 seconds
or more.
The installation location display illuminates.
Setting the air-conditioning installation location.
Press the AIR FLOW
( LEFT/RIGHT ) button and adjust to the
desired location.
Each time the AIR FLOW
(LEFT/RIGHT) button is pressed, the
indicator is switched in the order of:
(Center Installation)
(Right End Installation)
Press the ON/OFF button.
The air-conditioner's installation location is set.
Press within 60 seconds of setting the installation location (while the
installation location setting display illuminates).
Airflow range
(Right End Installation)
– 17 –
(Left End Installation)
Press within
60 sec.!
Airflow range
12/6/2018 11:48:22 AM
12/6/2018 11:48:22 AM