VDO M2.1 WL Manual page 14

M2.1 WL
Settings – wheel circumference
Setting in mm for KM: Setting in mm for KM
Press the SET button to confirm your setting.
The final digit on the right now flashes.
Press the BIKE button to set this digit.
Setting in mm for KM/ Inch for miles:
Press the SET button to confirm your setting.
Your wheel circumference setting is now complete.
The response "Set Ok" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2.1 WL returns to function mode.
14