Total Calorie Burn - VDO M2.1 WL Manual

M2.1 WL
Settings – total calorie burn
You can set the total calorie burn on the VDO M2.1 WL.
E.g. you can set your total calorie burn at the start of the
new cycling season.
ATTENTION: the VDO M2.1 WL has a data memory.
No data is lost.
The process is as follows:
Press and hold the SET button until the settings menu
opens.
"Language" appears on the display.
Press the BIKE button to scroll to the settings for
the Total Kcal (total calorie burn).
Press the SET button to open the setting.
The left digit flashes and is ready to be set.
Press the BIKE button to change the digit.
Once this digit has been set, confirm the setting
by pressing the SET button.
The next digit starts to flash and is ready to be set.
Press the BIKE button to change this digit.
Once this digit has also been set, confirm the setting
by pressing the SET button.
The next digit flashes.
Once you have set all four digits, confirm the setting again
by pressing the SET button.
The response "Set Ok" appears on the display.
The set value is stored.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2.1 WL returns to function mode.
22