Pulsar HPSBOC 3524B Manual
  1. Manuals
  2. Brands
  3. Pulsar Manuals
  4. Power Supply
  5. HPSBOC 3524B
  6. Manual

Pulsar HPSBOC 3524B Manual

Hpsboc 27,6v/3a/2x7ah/oc buffer, switch mode power supply unit with automatic operation control
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HPSBOC 3524B
v.1.1
HPSBOC 27,6V/3A/2x7Ah/OC
Buffer, switch mode power supply unit
with automatic operation control
EN
Edition: 3 from 05.06.2013
Supercedes edition: 2 from 07.03.2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HPSBOC 3524B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pulsar HPSBOC 3524B

Summary of Contents for Pulsar HPSBOC 3524B

  • Page 1 HPSBOC 3524B v.1.1 HPSBOC 27,6V/3A/2x7Ah/OC Buffer, switch mode power supply unit with automatic operation control Edition: 3 from 05.06.2013 Supercedes edition: 2 from 07.03.2013...

  • Page 2: Table Of Contents

    PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate two 7Ah/12V batteries. A micro switch indicates door opening (front cover). OPTIONAL POWER SUPPLY CONFIGURATIONS: (visualisation available at: www.pulsar.pl) 1. Buffer power supply unit HPSBOC 27,6V/2x1,5A/2x7Ah. - HPSBOC3524B + LB2 2x1,5A (AWZ586) + 2x7Ah 2.

  • Page 3: Block Diagram

    HPSBOC3524B 6. Buffer power supply unit HPSBOC 27,6V/5V÷18V/2A ÷1,3A/2x7Ah. - HPSBOC3524B + DCDC20 (5V÷18V/2A÷1,3A) + 2x7Ah 1.2 Block diagram Fig.1 Fig.1. The block diagram of the PSU 1.3 Description of PSU components and connectors ( tab.1, fig.2). Element no.
  • Page 4 HPSBOC3524B Fig. 2. The view of the PSU. Element no. Description [Fig. 3] PSU module TAMPER, contact, sabotage protection (NC) Tab.2. Output terminals of the PSU. Fig.3. The view of the PSU.

  • Page 5: Specifications

    HPSBOC3524B 1.4 Specifications - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Electrical parameters (tab. 3) Mains supply 176÷264V AC Current up to 0.9A@230VAC Supply power 100W max. Efficiency Output voltage 22V÷ 27,6V DC –...

  • Page 6: Installation

    HPSBOC3524B TAMPER output: wires Notes The enclosure does not adjoin the assembly surface so that cables can be led Operation safety (tab.5) Protection class PN-EN 60950-1:2007 I (first) Protection grade PN-EN 60529: 2002 (U) IP20 Electrical strength of insulation: - between input and output circuits of the PSU (I/P-O/P) 3000 V/AC min.

  • Page 7: Installation Procedure

    HPSBOC3524B 2.2 Installation procedure. 1. Before installation, cut off the voltage in the 230V power-supply circuit. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230Vac) to L-N clips of the PSU. Connect the ground wire to the clip marked by the earth symbol PE (PSU module connector).

  • Page 8: Technical Outputs

    HPSBOC3524B 3.2 Technical outputs The PSU has indication outputs: FAC - absence of AC supply output: - OC type output that indicates AC power loss. Under normal status, with 230V AC supply, the output is connected to ground (L level – 0V). In case of power loss, the PSU will switch the output into high impedance state hi-Z after approx.

  • Page 9: Maintenance

    GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such...

Table of Contents