1. Manuals
  2. Brands
  3. Pulsar Manuals
  4. Power Supply
  5. HPSBOC 3524C
  6. Quick start manual

Pulsar HPSBOC 3524C Quick Start Manual

27,6v/3a/2x17ah/oc buffer, switching power supply unit with automatic operation control
Hide thumbs Also See for HPSBOC 3524C:
Table of Contents

Advertisement

Quick Links

Download this manual
HPSBOC 3524C
v.1.0
HPSBOC 27,6V/3A/2x17Ah/OC
Buffer, switching power supply unit
with automatic operation control
EN
Edition: 2 from 07.03.2013
Supercedes edition: 1 from 13.02.2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HPSBOC 3524C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pulsar HPSBOC 3524C

Summary of Contents for Pulsar HPSBOC 3524C

  • Page 1 HPSBOC 3524C v.1.0 HPSBOC 27,6V/3A/2x17Ah/OC Buffer, switching power supply unit with automatic operation control Edition: 2 from 07.03.2013 Supercedes edition: 1 from 13.02.2013...

  • Page 2: Table Of Contents

    HPSBOC3524C Features: • • DC 27,6V/3A uninterruptible power supply FAC technical output indicating AC power loss • • fitting battery: 2x 17Ah/12V FPS technical output indicating PSU failure • • wide range of mains supply: 176÷264V FLB technical output indicating battery low •...

  • Page 3: Block Diagram

    HPSBOC3524C 6.Buffer power supply unit HPSBOC 27,6V/24V/8x0,3A/2x17Ah. - HPSBOC3524C + RN25024 (27,6V/24V) + LB8 8x0,3A (AWZ577 or AWZ580) +2x17Ah 7.Buffer power supply unit HPSBOC 27,6V/2x5V÷18V/2x2A ÷1,3A/2x17Ah. - HPSBOC3524C + 2xDCDC20 (2x5V÷18V/2A÷1,3A) + 2x17Ah 8.Buffer power supply unit HPSBOC 27,6V/2x5V÷18V/2x2A ÷1,3A/8x0,5A/2x17Ah.
  • Page 4 HPSBOC3524C Fig. 2. The view of the PSU. Element no. Description [Fig. 3] PSU module TAMPER, contact, sabotage protection (NC) Tab.2. Output terminals of the PSU. Fig.3. The view of the PSU.

  • Page 5: Specifications

    HPSBOC3524C 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Electrical parameters (tab. 3). Mains supply 176÷264V AC Current up to 0.9A@230VAC Supply power 100W max. Efficiency Output voltage 22V÷ 27,6V DC –...

  • Page 6: Installation

    HPSBOC3524C Operation safety (tab.5). Protection class PN-EN 60950-1:2007 I (first) Protection grade PN-EN 60529: 2002 (U) IP20 Electrical strength of insulation: - between input and output circuits of the PSU (I/P-O/P) 3000 V/AC min. - between input circuit and PE protection circuit (I/P-FG) 1500 V/AC min.

  • Page 7: Installation Procedure

    HPSBOC3524C 2.2 Installation procedure. 1. Before installation, cut off the voltage in the 230V power-supply circuit. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230Vac) to L-N clips of the PSU. Connect the ground wire to the clip marked by the earth symbol PE (PSU module connector).

  • Page 8: Operation And Use

    HPSBOC3524C CAUTION! In Fig.2. the contact set in the potential-free status corresponds to a state with no AC power (AC power failure). FPS – technical output indicating absence of DC voltage at the PSU: OC type output indicating the PSU failure.
  • Page 9 GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such...

Table of Contents