Table of Contents
Advertisement
21-MANUAL CONFIGURATION
If the remote Wi-Fi and temperature probe configurations do not work automatically, you must proceed with manual configuration.
MANUAL REMOTE WI-FI MODULE CONFIGURATION
From mobile phone -> Wi-Fi settings menu, Wi-Fi needs to be enabled on the mobile phone.
Search for "MCZ-RemoteService" from among the Wi-Fi networks available and connect to it (no password is required since it is an open
network).
Once connected to the following network, open the phone's browser and enter the following address: 192.168.1.1.
A screen opens, displaying nearby Wi-Fi routers. Select the router providing the internet connection and enter the respective password.
From now on, if the router provides a stable internet connection, it is possible to control the stove remotely.
Note: when the remote Wi-Fi module is configured correctly and connected to a router, the "MCZRemote Service" network disappears from
the list of available Wi-Fi networks.
MANUAL WI-FI TEMPERATURE PROBE CONFIGURATION
Once the 3 AA batteries are installed, the Wi-Fi temperature probe remains configurable for 8 minutes (ATTENTION! Only insert the
batteries just before proceeding with configuration).
Insert the batteries and start the procedure.
From mobile phone -> Wi-Fi settings menu, Wi-Fi needs to be enabled on the mobile phone.
Search for "MCZ-Sensor" from among the Wi-Fi networks available and connect to it (no password is required since it is an open network)
Once connected to the following network, open the phone's browser and enter the following address: 192.168.1.1.
A window opens that displays the stoves that can be associated with the Wi-Fi probe. Select your stove and enter the Wi-Fi Home password
(on the QR code label)
Once the Wi-Fi probe is connected, you can configure the stove to use the remote sensor; to do so, open the MCZ MAESTRO APP, connect
to your previously configured stove, use the shortcut by clicking on the temperature indicator at the top right of the app screen and select
the "Wi-Fi probe" as the temperature input.
Or from the setup menu -> configure ambient input and select the "Wi-Fi probe" temperature input
Notes: when the Wi-Fi temperature sensor has been configured correctly and connected to your MCZ stove, the "MCZ-Sensor" network
disappears from the list of available Wi-Fi networks.
15
Technical Dept. - All rights reserved - Reproduction prohibited
Advertisement
Table of Contents
