Table of Contents
Advertisement
The drum rotates and load detec-
a
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
The display shows the programme
a
duration or the programme end
time.
After the programme has ended,
a
the display shows: -0-.
13.7 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Start/Re-
.
load
To resume the programme, after
3.
the desired soaking time, press
Start/Reload
13.8 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press Start/Reload
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 22
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start/Reload
5.
13.9 Cancelling the pro-
gramme
Press Start/Reload
1.
Open the door.
2.
.
.
.
.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse
– If the water level is high, start
the
Spin programme or select
a suitable programme for drain-
ing.
→ "Programmes", Page 25
Remove the laundry.
3.
→ "Unloading the laundry",
Page 31
13.10 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.11 Switching off the appli-
ance
Press
.
1.
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
operation en
programme.
31
Advertisement
Table of Contents
