Aligning The Appliance - Siemens WM16XKH0HK User Manual And Installation Instructions

Hide thumbs Also See for WM16XKH0HK:
Table of Contents

Advertisement

en Installation and connection
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
Sink
Plastic pipe with
rubber sleeve or
gully
Connecting the appliance to the
electricity supply
Note: Your electrical domestic install-
ation for this appliance must comply
with the local legal provisions and
safety regulations, and should in-
clude a residual current circuit-
breaker.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
16
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow.
Fix and secure
the water outlet
hose with an el-
bow.
The connection details of the appli-
ance can be found under Tech-
nical data → Page 57.
Check the mains plug is inserted
2.
properly.
4.7 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Use a WAF 17 wrench to loosen
1.
the lock nuts in a clockwise direc-
tion.
To align the appliance, turn the ap-
2.
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.

Advertisement

Table of Contents
loading

Table of Contents