ICON Health & Fitness PRO-FORM POWER 1495 User Manual page 14

11. Attach the console assembly to the Handrails
(86, 87) with four #10 x 3/4" Screws (9) and four
#10 Star Washers (5) as shown. Start all four
Screws, and then tighten them.
Tighten the four 5/16" x 2 1/2" Screws (28).
12. See the inset drawing. Connect the Upright
Wire (81) to the console wire (E). The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Insert the excess wires (E, 81) into the Right
Upright (90).
Firmly tighten the four 5/16" x 1/2" Screws (4)
(only two are shown).
11
Console
Assembly
9
28
12
E
81
14
28
5
86
4
81
E
90
9
5
87