8. If there are four screws (C) in the locations
shown, remove and discard them.
9. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove and discard the three Screws (D).
Next, lift off the Console Cover (63).
Remove and save the four 5/16" x 1/2"
Screws (4).
10. Set the console assembly on the Left and Right
Handrails (86, 87). Make sure not to pinch any
wires (E, 81). Position the wires as shown.
Attach the console assembly with the four 5/16"
x 1/2" Screws (4) that you removed in step 9 and
four 5/16" Star Washers (11). Do not tighten the
Screws yet.
8
C
9
D
4
63
10
87
11
4
13
C
Console
Assembly
D
4
Console
Assembly
E
86
81
11
4