Aaeon BOXER-6357VS Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Desktop
  5. BOXER-6357VS
  6. Manual

Aaeon BOXER-6357VS Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
R a i l w a y
B O X E R - 6 3 5 7 V S
E m b e d d e d B o x P C
BOXER-6357VS
Railway Embedded Box PC
®
Onboard Intel
Core™ i7 Processor
EN50155Tx-Certified, Isolated Digital I/O
Hot-Swappable/Pluggable/RAID-enabled HDD
st
BOXER-6357VS Manual 1
Ed
June 11, 2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BOXER-6357VS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon BOXER-6357VS

Summary of Contents for Aaeon BOXER-6357VS

  • Page 1 B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C BOXER-6357VS Railway Embedded Box PC ® Onboard Intel Core™ i7 Processor EN50155Tx-Certified, Isolated Digital I/O Hot-Swappable/Pluggable/RAID-enabled HDD BOXER-6357VS Manual 1 June 11, 2015...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Acknowledgments All other products’ name or trademarks are properties of their respective owners.
  • Page 4 E m b e d d e d B o x P C Packing List Before you begin installing your system, please make sure that the following materials have been shipped:  BOXER-6357VS Embedded Box PC  M2 x 3 mm screws (S1A5003030)  M4 x 6 mm screws (S1F5106010) ...
  • Page 5 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Safety & Warranty Please read the following safety instructions carefully. It is advised that you keep this manual for future references Disconnect this device from any AC supply before cleaning.
  • Page 6 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C or electric shocks. 13. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components.
  • Page 7 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must...
  • Page 8 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅 汞...
  • Page 9 B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C China RoHS Requirements Poisonous or Hazardous Substances or Elements in Products AAEON Boxer/ Industrial System Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated...

  • Page 10: Table Of Contents

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Contents Chapter 1 General Information 1.1 Introduction ..............1-2 1.2 Features ..............
  • Page 11 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5.10 M12 USB 2.0 x 2 (USBM1)......2-17 2.5.11 PoE Control Bus Connector (POECN1) ..
  • Page 12 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C C.2 Setting AHCI ............. C-12 Appendix D RAID & AHCI Settings D.1 DI/O Programming ..........

  • Page 13: Chapter 1 General Information

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 14: Introduction

    Users may refer to the AAEON.com for the latest version of this document. 1- 2 Chapter 1 General Information...

  • Page 15: Features

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 1.2 Features ®  Onboard Intel Core™ i7-3517UE Processor ...

  • Page 16: Specifications

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 1.3 Specifications ® Intel Core™ i7-3517U, up to 2.8 GHz ®...
  • Page 17 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Cable) Rear I/O USB Port USB 3.0 x 2 (Type A) Serial Port RS-232/422/485 x 2 (DB-9, non-isolated) RS-232/422/485 x 1 (DB-9, isolated)
  • Page 18 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Mounting Wall Mount Operating Temperature -40°C ~ 70°C (-40°F ~ 158°F), 85°C (185°F) for 10 minutes only Storage Temperature -40°C ~ 80°C (-40°F ~ 176°F)

  • Page 19: Chapter 2 Quick Installation Guide

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Chapter Quick Installation Guide Chapter 2 Quick Installation Guide...

  • Page 20: Safety Precautions

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 21: Dimensions And I/Os

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.2 Dimensions and I/Os A A E O N A A E O N A A E O N MX+2...
  • Page 22 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Front A A E O N MX+2 MX+2 USB+ USB- MX-2...

  • Page 23: Setting Jumpers

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.3 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.

  • Page 24: List Of Jumpers

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 25: Clear Cmos Selection (Jp1)

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.4.1 Clear CMOS Selection (JP1) Normal (Default) Clear CMOS Function Normal (Default) Clear CMOS...

  • Page 26: List Of Connectors

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 27 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C PWESW1 Power Switch LEDSB5VCN12 Power Standby Connector LEDCN19 Power LED Connector HDDLEDCN1 Hard Disk LED...

  • Page 28: M12 Ethernet 1/2 (Cn1/2)

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5.1 M12 Ethernet 1/2 (CN1/2) Signal Signal MX-0 MX+0 MX+3 MX-2...

  • Page 29: Biod Spi Flash Header (Cn7)

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5.3 BIOS SPI Flash Header (CN7) Signal Signal 3.3 V 2.5.4 LCP Connector (CN18) Pin Name...

  • Page 30: Usb 2.0 Connector (Cn23)

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5.6 USB 2.0 Connector (CN23) Pin Name Pin Name ENABLE 2.5.7 Digital Input/ Output (CN35) Pin Name...
  • Page 31 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Dry and Wet Contact Digital Input 2-13 Chapter 2 Quick Installation Guide...
  • Page 32 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Dry Contact Wiring Wet Contact Wiring *Digital input voltage range Max: 10 ~ 25V Min: 5V Pin Name...
  • Page 33 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Dry and Wet Contact Digital Output Dry Contact Wiring Wet Contact Wiring *User I/O Level *Digital output voltage range:...

  • Page 34: Com1/2 Rs-232/422/485 Connector (Cn38/39)

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5.8 COM1/2 RS-232/422/485 Connector (CN38/39) Signal Signal DCD (422TXD-/ RXD (422RXD+) 485DATA+) TXD (422TXD+/...

  • Page 35: M12 Usb 2.0 X 2 (Usbm1)

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5.10 M12 USB 2.0 x 2 (USBM1) Pin Name Pin Name USB1- USB1+...

  • Page 36: Poe On/Off Connector (Poecn2)

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 2.5.13 PoE On/Off Connector (POECN2) Pin Name Pin Name POE SWITCH I/O 2.5.14 Power Switch (PWESW1) Pin Name...
  • Page 37 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 38: System Test And Initialization

    4. The CMOS memory has lost power and the configuration information has been erased. The BOXER-6357VS CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 39: Ami Bios Setup

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 40 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Setup Menu Setup submenu: Main Chapter 3 AMI BIOS Setup 3-4...
  • Page 41 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5...
  • Page 42 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C CPU Configuration Options summary: Hyper-Threading Disabled Enabled Optimal Default, Failsafe Default Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology).
  • Page 43 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C IDE Configuration (IDE) Options summary: Enable Optimal Default, Failsafe Default SATA Controllers Disable En/Disable SATA Controller...
  • Page 44 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C USB Configuration Options summary: Legacy USB Support Enable Optimal Default, Failsafe Default Disable Enables Legacy USB support.
  • Page 45 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Hardware Monitor Chapter 3 AMI BIOS Setup 3-9...
  • Page 46 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Dynamic Digital IO Configuration Options summary: DIO_P#5 Direction[Output] Output Level Optimal Default, Failsafe Default Set DIO_P#5 output as Hi or Low...
  • Page 47 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C AMT Configuration Options summary: Disabled Intel AMT Enabled Optimal Default, Failsafe Default Enable/Disable Intel (R) Active Management Technology BIOS Extension.
  • Page 48 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Super IO Configuration Chapter 3 AMI BIOS Setup 3-12...
  • Page 49 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Serial Port 1 Configuration Options summary: Disabled Serial Port Enabled Optimal Default, Failsafe Default Enable or disable serial port (COM)
  • Page 50 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Serial Port 2 Configuration Options summary: Disabled Serial Port Enabled Optimal Default, Failsafe Default Enable or disable serial port (COM)
  • Page 51 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Serial Port 3 Configuration Options summary: Disabled Serial Port Enabled Optimal Default, Failsafe Default Enable or disable serial port (COM)
  • Page 52 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Serial Port 4 Configuration Options summary: Disabled Serial Port Enabled Optimal Default, Failsafe Default Enable or disable serial port (COM)
  • Page 53 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Power Saving Function Options summary: Disabled Optimal Default, Failsafe Default Power Saving Function Enabled Enable to reduce power consumption in system off state...
  • Page 54 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Setup submenu: Chipset Chapter 3 AMI BIOS Setup 3-18...
  • Page 55 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C PCH-IO Configuration Options summary: Power Mode ATX Type Optimal Default, Failsafe Default AT Type Select Power Supply Mode...
  • Page 56 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Enable/disable Deep S5/\n\nNote :\n When Deep S5 is enabled, Intel® AMT and Wake On PCH LAN functions are not available in system shut down.
  • Page 57 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C System Agent (SA) Configuration Options summary: VBIOS Default Optimal Default, Failsafe Default Primary IGFX Boot Display CRT2...
  • Page 58 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Setup submenu: Boot Options summary: Quiet Boot Disabled Enabled Default Launch I82579LM PXE OpROM...
  • Page 59 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password.
  • Page 60 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Setup submenu: Save&Exit Chapter 3 AMI BIOS Setup 3-24...

  • Page 61: Chapter 4 Driver Installation

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Chapter D river Installation 4 -1 Chapter 4 Driver Installation...
  • Page 62 B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C The BOXER-6357VS comes with a driver disk that contains all drivers and utilities that can help you setup your product.
  • Page 63 E m b e d d e d B o x P C 4.1 Installation Insert the BOXER-6357VS driver disk into the disk drive. And install the drivers from Step 1 to Step 8 in order. Step 1 – Install Chipset Driver...
  • Page 64 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 4 –Install Audio Driver 1. Open the Step 4 - AUDIO folder and select your OS 2.
  • Page 65 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C For Windows 7 Open and install NDP452-KB2901907-x86-x64-AllOS-ENU.exe Open the STEP 7 – RAID&AHCI folder and select the win7_win8.1 folder Open SetupRST.exe Follow the instructions...

  • Page 66: Appendix A Programming The Watchdog Timer

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 67: Watchdog Timer Initial Program

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C A.1 Watchdog Timer Initial Program Table 1 : SuperIO relative register table Default Value Note SIO MB PnP Mode Index Register...
  • Page 68 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value);...
  • Page 69 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ Main VOID // Procedure : AaeonWDTConfig // (byte)Timer : Time of WDT timer.(0x00~0xFF) // (boolean)Unit : Select time unit(0: second, 1: minute).
  • Page 70 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ // Procedure : AaeonWDTEnable AaeonWDTEnable () VOID WDTEnableDisable( EnableLDN, EnableReg, EnableBit, 1 // Procedure : AaeonWDTConfig...
  • Page 71 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ SIOEnterMBPnPMode() VOID IOWriteByte(SIOIndex, 0x87); IOWriteByte(SIOIndex, 0x87); SIOExitMBPnPMode() VOID IOWriteByte(SIOIndex, 0xAA);...

  • Page 72: Appendix B I/O Information

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix I/O Information Appendix B I/O Information...

  • Page 73: I/O Address Map

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B.1 I/O Address Map Appendix B I/O Information...
  • Page 74 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix B I/O Information...
  • Page 75 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix B I/O Information...

  • Page 76: Memory Address Map

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B.2 Memory Address Map Appendix B I/O Information...

  • Page 77: Irq Mapping Chart

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B.3 IRQ Mapping Chart Appendix B I/O Information...
  • Page 78 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix B I/O Information...
  • Page 79 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix B I/O Information...
  • Page 80 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix B I/O Information...
  • Page 81 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-10 Appendix B I/O Information...
  • Page 82 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-11 Appendix B I/O Information...
  • Page 83 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-12 Appendix B I/O Information...
  • Page 84 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-13 Appendix B I/O Information...
  • Page 85 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-14 Appendix B I/O Information...
  • Page 86 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-15 Appendix B I/O Information...
  • Page 87 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-16 Appendix B I/O Information...
  • Page 88 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-17 Appendix B I/O Information...
  • Page 89 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B-18 Appendix B I/O Information...

  • Page 90: Dma Channel Assignment

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C B.4 DMA Channel Assignments B-19 Appendix B I/O Information...

  • Page 91: Appendix C Raid & Ahci Settings

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix RAID & AHCI Settings Appendix C RAID & AHCI Settings...

  • Page 92: Setting Raid

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C C.1 Setting RAID OS installation to setup RAID Mode Step 1: Copy the files below from “Driver CD ->Step 7 - RAID&AHCI”...
  • Page 93 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced ->...
  • Page 94 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 5: The setting procedures “In BIOS Setup Menu” C: Boot ->...
  • Page 95 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 7: Press Ctrl-I to enter MAIN MENU Step 8: Choose “1.Create RAID Volume”...
  • Page 96 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 9: RAID Level -> RAID0(Stripe) Step 10: Choose “Create Volume” Appendix C RAID &...
  • Page 97 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 11: Choose “Y” Step 12: Choose “5. Exit” Appendix C RAID &...
  • Page 98 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 13: Choose “Y” Step 14: Setup OS Appendix C RAID &...
  • Page 99 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 15: Press “F6” Step 16: Choose “S” Appendix C RAID &...
  • Page 100 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 17: Choose “Intel(R) Mobile Express Chipset SATA RAID Controller”...
  • Page 101 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 19: Setup is starting Windows C-11 Appendix C RAID & AHCI Settings...

  • Page 102: Setting Ahci

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C C.2 Setting AHCI OS installation to setup AHCI Mode Step 1: Copy the files below from “Driver CD ->Step 7 - RAID&AHCI”...
  • Page 103 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced ->...
  • Page 104 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 5: The setting procedures “In BIOS Setup Menu” C: Save &...
  • Page 105 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 7: Press “F6” Step 8: Choose “S” C-15 Appendix C RAID &...
  • Page 106 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 9: Choose “Intel(R) 7 Series Chipset Family SATA AHCI Controller” Step 10: It will show the model number you select and then press “ENTER”...
  • Page 107 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Step 11: Setup is loading files C-17 Appendix C RAID & AHCI Settings...
  • Page 108 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C Appendix Electrical Specifications for I/O Ports Appendix D Electrical Specifications for I/O Ports...

  • Page 109: Di/O Programming

    B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C D.1 DI/O Programming BOXER-6357VS utilizes FINTEK 81866 chipset as its Digital I/O controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application.

  • Page 110: Digital I/O Register

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C D.2 Digital I/O Register Table 1 : SuperIO relative register table Default Value Note SIO MB PnP Mode Index Register...

  • Page 111: Digital I/O Sample Program

    R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C D.3 Digital I/O Sample Program ************************************************************************************ // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value);...
  • Page 112 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ // Digital Output control relative definition (Please reference to Table 3) #define byte DOutput1LDN // This parameter is represented from Note27 #define byte DOutput1Reg // This parameter is represented from Note28 #define byte DOutput1Bit // This parameter is represented from Note29...
  • Page 113 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ Main VOID Boolean PinStatus ; // Procedure : AaeonReadPinStatus // Input : Example, Read Digital I/O Pin 3 status // Output :...
  • Page 114 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ AaeonReadPinStatus(byte LDN, byte Register, byte BitNum) Boolean Boolean PinStatus ;...
  • Page 115 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ SIOEnterMBPnPMode() VOID IOWriteByte(SIOIndex, 0x87); IOWriteByte(SIOIndex, 0x87); SIOExitMBPnPMode() VOID IOWriteByte(SIOIndex, 0xAA);...
  • Page 116 R a i l w a y B O X E R - 6 3 5 7 V S E m b e d d e d B o x P C ************************************************************************************ SIOBitRead(byte LDN, byte Register, byte BitNum) Boolean Byte TmpValue;...

Table of Contents