Hardware Installation - TRENDnet 15AH-28B Quick Installation Manual

2. Hardware Installation

Note: Configure your Internet Camera Server to match your network settings
before installing the device.
1. Lift up the latch and pull the roof
upward.
2. Remove the metal bracket from
the camera enclosure by
unscrewing the four screws. Save
these screws. You will need to use
these screws later.
3. Use the following 2 sets of screws
and washers to mount the metal
bracket onto the base of the
Internet Camera Server. The
screws and washers can be found
in the plastic bags included with
the 15AH-28B.
2
English