TRENDnet 15AH-28B Quick Installation Manual page 7

17. Run the power adapter and the
RJ-45 Ethernet cable from the
base to the top of the mounting
arm. Make sure to leave one end
of the RJ-45 Ethernet cable
unterminated.
18. Insert the power adapter, RJ-45
Ethernet Cable through the
rubber stopper screw it in
securely.
19. Connect the two ends of the
power adapter back by twisting
the copper wiring. Make sure you
do not cross the copper wires.
20. Use electrical tape to seal the
cables back together.
6
English