Troubleshooting - TRENDnet 15AH-28B Quick Installation Manual

Troubleshooting

Q1: After I put my Internet Camera Server in the enclosure, the image is
distorted. What should I do?
A1:
First, make sure that you have adjusted the focus on your camera.
Second, mount the 15AH-28B so that it's not in direct view of the sun.
Third, if you are using a day/night camera with auto iris lens, make sure to
push the camera all the may to the front so that the lens is touching the
glass.
Q2: My Ethernet cable will not fit through the rubber stopper. What
should I do?
A2:
You must first run the Ethernet cable through the rubber stopper
unterminated. Once the Ethernet cable is run through the rubber
stopper and the 15AH-28B, then terminate the Ethernet cable with an
RJ-45 jack.
If you still encounter problems or have any questions regarding the
15AH-28B, please contact TRENDnet's Technical Support Department.
10