Table of Contents
Advertisement
SETTINGS
For buttons to be used see "Control Panel"
Acknowledge an Alarm
If an alarm becomes active, for example a Low Fuel Level
Warning:
MAIN VIEW
LOADED
12.3
3000 FUEL LEVEL LOW WARNING
then this alarm can be acknowledged by pressing the
ENTER button. If the fuel level is still low, the view will
change to:
MAIN VIEW
LOADED
12.3
9%
1381h
1300RPM
As soon as the fuel level is higher than the warning level,
the alarm icon will automatically disappear.
As long as there is an alarm icon in the middle of the
bottom part of the view, all active acknowledged /
unacknowledged alarms can be seen by pressing the
ALARM VIEW button
Pressing the ALARM VIEW button again, will bring you
back to the Main View.
Set Clock
Press the SETTINGS VIEW button
•
scroll to '1000 GENERAL SETTINGS'
•
press ENTER
•
scroll to '1290 DATE/TIME'
•
ENTER the Date/Time menu
•
scroll to the parameter you want to change
•
ENTER this parameter.
To change the 'Month', scroll to the preferred month and
press ENTER.
To change any other setting, the highlighted figure is
editable.
Scroll up/down and press ENTER to change. Use left/
right to shift between editable figures.
Now press BACK until you're back in the Main View (or
in the menu you require).
Set Language
Press the SETTINGS VIEW button.
•
scroll to '1000 GENERAL SETTINGS'
•
press ENTER
•
scroll to '1300 LANGUAGES'
•
ENTER the LANGUAGES menu,
•
ENTER the 'SETTINGS' parameter
•
scroll to the preferred language
•
press ENTER.
Now press BACK until you're back in the Main View (or
12.3bar
in the menu you require).
Set Units
Press the SETTINGS VIEW button,
•
•
•
•
•
•
•
Now press BACK until you're back in the Main View (or
in the menu you require).
Change Display Settings
Press the SETTINGS VIEW button
•
•
•
•
•
•
To change a setting, the highlighted figure is editable.
Scroll up/down and press ENTER to change. Use left/
right to shift between editable figure.
Now press BACK until you're back in the Main View (or
in the menu you require).
- 43 -
scroll to '1000 GENERAL SETTINGS'
press ENTER
scroll to the unit you would like to change:
'1340 TEMPERATURE UNITS'
'1350 PRESSURE UNITS'
'1360 FUEL FLOW UNITS'
ENTER the preferred menu
ENTER the 'SETTINGS' parameter
scroll to the preferred setting
press ENTER.
scroll to '1000 GENERAL SETTINGS'
press ENTER
scroll to '1310 DISPLAY BACKLIGHT'
ENTER the DISPLAY BACKLIGHT menu
scroll to the setting you would like to change
press ENTER.
Advertisement
Table of Contents
