Benning PV 1-1+ Operating Manual page 2

Legal notice
Notes concerning the documentation
Ensure that the applicable documentation is used for this product. For safe handling, knowledge
that is provided in these instructions is required.
The product may only be handled while following this documentation, particularly the safety
instructions and warnings it contains. The personnel must be qualified for the respective task
and have the capability to recognise risks and prevent possible dangers.
Manufacturer and holder of rights
BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Münsterstraße 135 – 137
46397 Bocholt
Germany
Phone: +49 2871 / 93‑0
E‑mail: duspol@benning.de
Internet: www.benning.de
Commercial register Coesfeld HRA no. 4661
Copyright
© 2023, BENNING Elektrotechnik und Elektronik GmbH & Co. KG
All rights reserved.
This document – particularly all of the contents, texts, photographs and graphics that it
contains – are protected by copyright.
No part of this documentation or the associated contents may be reproduced or edited, copied
or distributed using electronic media in any form (printed, photocopied or using any other
method) without express written permission.
Disclaimer
The contents of the documentation has been checked to ensure that it corresponds to the
hardware and software described. Nevertheless, deviations cannot be ruled out, so Benning
cannot guarantee complete correspondence. The contents of this documentation are checked
at regular intervals, and any corrections that are needed are contained in the versions that
follow.
General non-discrimination
Benning is aware of the importance of language with regard to the gender equality and
endeavors to take this into account at all times. To improve readability, we have refrained from
consistently using differentiating formulations.
2 BENNING PV 1-1+
Legal notice
5290 / 06/2023 en