Cleaning; Faults And Remedial Measures; Preparing For Disposal; Disposal - HOMCOM 850-223V90 Manual

EN
is [0000], week is [1], [P1–P7] is the default setting,
all the timing contents are restored to the factory set-
tings.

Cleaning

DANGER! Risk of injury! Before all work
on the device, always disconnect the mains
plug.
NOTICE! Product damage! Never use
detergents or solvents for cleaning. This
can cause irreparable damage to the prod-
uct. The plastic parts can be eaten away by
chemicals.
– Switch off the device and let it cool off completely.
Fault/malfunction
Device does not heat
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Wrong alarms:
Phenomenon
The temperature sensor
is in short circuit state or
the temperature is ex-
ceed 55 °C

Preparing for disposal

NOTICE! Environmental pollution! The
device is filled with a particular quantity of
special oil. Repairs which require the open-
ing of the oil tank may only be carried out by
the manufacturer or its customer service
partner.
Follow guidelines with respect to disposal of
the oil and scrapping of the device.

Disposal

Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
26
Cause
Is the device switched off?
Is the temperature regulator set too
low?
No mains voltage?
instruction
The temperature indicate
Er
– Pull out the plug.
– Wipe the device with a slightly damp cloth.

Faults and remedial measures

When something isn't working...
DANGER! Risk of injury! Improperly per-
formed repairs can lead to the device not
functioning safely. This endangers yourself
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedial measure
Switch on the device or set the de-
sired heat level.
Set the temperature regulator high-
er.
Check cables, plugs, outlets and
fuse.
with household waste. They may contain substances
that are harmful to the environment and human
health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.