Electrical Principle Drawing; Cleaning And Maintenance Methods - HOMCOM 820-271 Instruction Manual

15. Do not use automatically connected to the power supply with program, timer,
or any other device to use this heater. Must be installed two feet firstly, and with a
screw.
16. Fixing the foot with peg

Electrical Principle Drawing

Clean and maintenance method
1. Before cleaning and maintenance, have to pull out of the power supply's plug,
cut down the power, make it cooling 10mins, after that, could process cleaning.
2. Body's clean forbid using water, could be grazed by soft cloth with neutral
detergent, after it make it dry. Please don't use solvent such as gasoline.
3. After clean and maintenance, have to make sure the machine intensive drying,
could power on to use or store.
4. If the machine is without working, please pull out and pull away of the plug, and
covering with bag film in order to preventing the dust. It is better package by origin
case, and store at dry place.